A growing measles outbreak in South Carolina has infected more than 600 people since October, with hundreds more being potentially exposed.

SAN FRANCISCO – Italian space logistics specialist D-Orbit has raised $124 million in the first closing of a Series D investment round announced Jan. 22. “This funding will enable strategic acquisitions, accelerate the build-out of D-Orbit’s orbital logistics infrastructure, expand in-orbit transportation services, scale industrial capacity for ION missions and advance new operational capabilities required […]

The post D-Orbit raises $128 million in first tranche of Series D funding appeared first on SpaceNews.

“God does not play dice.”

With this famous remark at the 1927 Solvay Conference, Albert Einstein set the tone for one of physics’ most enduring debates. At the heart of his dispute with Niels Bohr lay a question that continues to shape the foundations of physics: does the apparently probabilistic nature of quantum mechanics reflect something fundamental, or is it simply due to lack of information about some “hidden variables” of the system that we cannot access?

Physicists at University College London, UK (UCL) have now addressed this question via the concept of quantum state diffusion (QSD). In QSD, the wavefunction does not collapse abruptly. Instead, wavefunction collapse is modelled as a continuous interaction with the environment that causes the system to evolve gradually toward a definite state, restoring some degree of intuition to the counterintuitive quantum world.

A quantum coin toss

To appreciate the distinction (and the advantages it might bring), imagine tossing a coin. While the coin is spinning in midair, it is neither fully heads nor fully tails – its state represents a blend of both possibilities. This mirrors a quantum system in superposition.

When the coin eventually lands, the uncertainty disappears and we obtain a definite outcome. In quantum terms, this corresponds to wavefunction collapse: the superposition resolves into a single state upon measurement.

In the standard interpretation of quantum mechanics, wavefunction collapse is considered instantaneous. However, this abrupt transition is challenging from a thermodynamic perspective because uncertainty is closely tied to entropy. Before measurement, a system in superposition carries maximal uncertainty, and thus maximum entropy. After collapse, the outcome is definite and our uncertainty about the system is reduced, thereby reducing the entropy.

This apparent reduction in entropy immediately raises a deeper question. If the system suddenly becomes more ordered at the moment of measurement, where does the “missing” entropy go?

From instant jumps to continuous flows

Returning to the coin analogy, imagine that instead of landing cleanly and instantly revealing heads or tails, the coin wobbles, leans, slows and gradually settles onto one face. The outcome is the same, but the transition is continuous rather than abrupt.

This gradual settling captures the essence of QSD. Instead of an instantaneous “collapse”, the quantum state unfolds continuously over time. This makes it possible to track various parameters of thermodynamic change, including a quantity called environmental stochastic entropy production that measures how irreversible the process is.

Another benefit is that whereas standard projective measurements describe an abrupt “yes/no” outcome, QSD models a broader class of generalized or “weak” measurements, revealing the subtle ways quantum systems evolve. It also allows physicists to follow individual trajectories rather than just average outcomes, uncovering details that the standard framework smooths over.

“The QSD framework helps us understand how unpredictable environmental influences affect quantum systems,” explains Sophia Walls, a PhD student at UCL and the first author of a paper in Physical Review A on the research. Environmental noise, Walls adds, is particularly important for quantum technologies, making the study’s insights valuable for quantum error correction, control protocols and feedback mechanisms.

Bridging determinism and probability

At first glance, QSD might seem to resemble decoherence, which also arises from system–environment interactions such as noise. But the two differ in scope. “Decoherence explains how a system becomes a classical mixed state,” Walls clarifies, “but not how it ultimately purifies into a single eigenstate.” QSD, with its stochastic term, describes this final purification – the point where the coin’s faint shimmer sharpens into heads or tails.

In this view, measurement is not a single act but a continuous, entropy-producing flow of information between system and environment – a process that gradually results in manifestation of one of the possible quantum states, rather than an abrupt “collapse”.

“Standard quantum mechanics separates two kinds of dynamics – the deterministic Schrödinger evolution and the probabilistic, instantaneous collapse,” Walls notes. “QSD connects both in a single dynamical equation, offering a more unified description of measurement.”

This continuous evolution makes otherwise intractable quantities, such as entropy production, measurable and meaningful. It also breathes life into the wavefunction itself. By simulating individual realizations, QSD distinguishes between two seemingly identical mixed states: one genuinely entangled with its environment, and another that simply represents our ignorance. Only in the first case does the system dynamically evolve – a distinction invisible in the orthodox picture.

A window on quantum gravity?

Could this diffusion-based framework also illuminate other fundamental questions beyond the nature of measurement? Walls thinks it’s possible. Recent work suggests that stochastic processes could provide experimental clues about how gravity behaves at the quantum scale. QSD may one day offer a way to formalize or test such ideas. “If the nature of quantum gravity can be studied through a diffusive or stochastic process, then QSD would be a relevant framework to explore it,” Walls says.

The post Modelling wavefunction collapse as a continuous flow yields insights on the nature of measurement appeared first on Physics World.

Learn how a 2.6-million-year-old Paranthropus jaw from Ethiopia’s Afar region is reshaping scientists’ understanding of early human evolution and competition with Homo.

Learn about a 500,000-year old hammer made from elephant bone, used by early humans in England to sharpen stone tools.

Learn more about the DNA and RNA that sperm carry and how they may suddenly change during midlife. 

Learn how trained dogs smell subtle chemical signals linked to cancer in blood samples.

Blue Origin aims to start deploying more than 5,400 satellites from late next year for its own Starlink broadband competitor, targeting up to 6 Tbps capacity for enterprise, data center and government customers.

The post Blue Origin plans bespoke high-speed Starlink rival appeared first on SpaceNews.

Learn more about the upcoming Artemis II mission and the process the rocket will need to go through before liftoff.

Learn more about the climate events that may have led to food shortages and the collapse of the Tang Dynasty.

A lone elephant has killed over 20 people in India, revealing the tragic consequences of habitat loss and human expansion.

Learn more about GLP-1 pills and how they may be more convenient and cost-effective than the injections. 

New study shows how engineered proteins can be tracked with an MRI-like approach

Hand stencils from a Southeast Asian cave predate Neanderthal cave art from Europe

Mementos may have reinforced vast social networks during turbulent times

An unprecedented assault has forced researchers to rethink their advocacy tactics

Enigmatic organism known as Prototaxites cannot be fungus, new analysis finds

A huge portion of the United States is going to be hit with snow or freezing rain this weekend. Exactly where, what, and how much remains uncertain.

The Exploration Company is in talks to acquire Orbex, the U.K.-based small launch vehicle developer that has reportedly been in financial distress.

The post The Exploration Company in talks to acquire Orbex appeared first on SpaceNews.

A miniature version of an atomic fountain clock has been unveiled by researchers at the UK’s National Physical Laboratory (NPL). Their timekeeper occupies just 5% of the volume of a conventional atomic fountain clock while delivering a time signal with a stability that is on par with a full-sized system. The team is now honing its design to create compact fountain clocks that could be used in portable systems and remote locations.

The ticking of an atomic clock is defined by the frequency of the electromagnetic radiation that is absorbed and emitted by a specific transition between atomic energy levels. Today, the second is defined using a transition in caesium atoms that involves microwave radiation. Caesium atoms are placed in a microwave cavity and a measurement-and-feedback mechanism is used to tune the frequency of the cavity radiation to the atomic transition – creating a source of microwaves with a very narrow frequency range centred at the clock frequency.

The first atomic clocks sent a fast-moving beam of atoms through a microwave cavity. The precision of such a beam clock is limited by the relatively short time that individual atoms spend in the cavity. Also, the speed of the atoms means that the measured frequency peak is shifted and broadened by the Doppler effect.

Launching atoms

These problems were addressed by the development of the fountain clock, in which the atoms are cooled (slowed down) by laser light, which also launches the atoms upwards. The atoms pass through a microwave cavity on the way up, and again as they fall back down. The atoms travel at much slower speeds than in a beam clock. The atoms spend much more time in the cavity and therefore the time signal from an atomic clock is much more precise than a beam clock. However, long times result in greater thermal spread of the atomic beam – which degrades clock performance. Trading-off measurement time with thermal spread means that the caesium fountain clocks that currently define the second have drops of about 30 cm.

Other components are also needed to operate fountain clocks – including a vacuum system and laser and microwave instrumentation. This pushes the height of a typical clock to about 2 m, and makes it a complex and expensive instrument that cannot be easily transported.

Now, Sam Walby and colleagues at NPL have shrunk the overall height of a rubidium-based fountain clock to 80 cm, while retaining the 30 cm drop. The result is an instrument that is 5% the volume of one of NPL’s conventional caesium atomic fountain clocks.

Precise yet portable

“That’s taking it from barely being able to fit though a doorway, to something one could pick up and carry with one arm,” says Walby.

Despite the miniaturization, the mini-fountain achieved a stability of one part in 10¹⁵ after several days of operation – which NPL says is comparable to full-sized clocks.

Walby told Physics World that the NPL team achieved miniaturization by eliminating two conventional components from their clock design. One is a dedicated chamber used to measure the quantum states of the atoms. Instead, this measurement is make within the clock’s cooling chamber. Also eliminated is a dedicated state-selection microwave cavity, which puts the atoms into the quantum state from which the clock transition occurs.

“The mini-fountain also does this [state] selection,” explains Walby, “but instead of using a dedicated cavity, we use a coax-to-waveguide adapter that is directed into the cooling chamber, which creates a travelling wave of microwaves at the correct frequency.”

The NPL team also reduced the amount of magnetic shielding used, which meant that the edge-effects of the magnetic field had to be more carefully considered. The optics system of the clock was greatly simplified and the use of commercial components mean that the clock is low maintenance and easy to operate – according to NPL.

Radical simplification

“By radically simplifying and shrinking the atomic fountain, we’re making ultra-precise timing technology available beyond national labs,” said Walby. “This opens new possibilities for resilient infrastructure and next-generation navigation.”

According to Walby, one potential use of a miniature atomic fountain clock is as a holdover clock. These are devices that produce a very stable time signal when not synchronized with other atomic clocks. This is important for creating resilience in infrastructure that relies on precision timing – such as communications networks, global navigation satellite systems (including GPS) and power grids. Synchronization is usually done using GNSS signals but these can be jammed or spoofed to disrupt timing systems.

Holdover clocks require time errors of just a few nanoseconds over a month, which the new NPL clock can deliver. The miniature atomic clock could also be used as a secondary frequency standard for the SI second.

The small size of the clock also lends itself to portable and even mobile applications, according to Walby: “The adaptation of the mini-fountain technology to mobile platforms will be subject of further developments”.

However, the mini-clock is large when compared to more compact or chip-based clocks – which do not perform as well. Therefore, he believes that the technology is more likely to be implemented on ships or ground vehicles than aircraft.

“At a minimum, it should be easily transportable compared to the current solutions of similar performance,” he says.

“Highly innovative”

Atomic-clock expert Elizabeth Donley tells Physics World, “NPL has been highly innovative in recent years in standardizing fountain clock designs and even supplying caesium fountains to other national standards labs and organizations around the world for timekeeping purposes. This new compact rubidium fountain is a continuation of this work and can provide a smaller frequency standard with comparable performance to the larger fountains based on caesium.”

Donley spent more than two decades developing atomic clocks at the US National Institute of Standards and Technology (NIST) and now works as a consultant in the field. She agrees that miniature fountain clocks would be useful for holding-over timing information when time signals are interrupted.

She adds, “Once the international community decides to redefine the second to be based on an optical transition, it won’t matter if you use rubidium or caesium. So I see this work as more of a practical achievement than a ground-breaking one. Practical achievements are what drives progress most of the time.”

The new clock is described in Applied Physics Letters.

The post NPL unveils miniature atomic fountain clock   appeared first on Physics World.

Study reveals role of “fine-grained” ancestry in predicting response to painkillers, statins, and other drugs

Researchers in Switzerland have found an unexpected new use for an optical technique commonly used in silicon chip manufacturing. By shining a focused laser beam onto a sample of material, a team at the Paul Scherrer Institute (PSI) and ETH Zürich showed that it was possible to change the material’s magnetic properties on a scale of nanometres – essentially “writing” these magnetic properties into the sample in the same way as photolithography etches patterns onto wafers. The discovery could have applications for novel forms of computer memory as well as fundamental research.

In standard photolithography – the workhorse of the modern chip manufacturing industry – a light beam passes through a transmission mask and projects an image of the mask’s light-absorption pattern onto a (usually silicon) wafer. The wafer itself is covered with a photosensitive polymer called a resist. Changing the intensity of the light leads to different exposure levels in the resist-covered material, making it possible to create finely detailed structures.

In the new work, Laura Heyderman and colleagues in PSI-ETH Zürich’s joint Mesoscopic System group began by placing a thin film of a magnetic material in a standard photolithography machine, but without a photoresist. They then scanned a focused laser beam over the surface of the sample while modulating the beam’s wavelength of 405 nm to deliver varying intensities of light. This process is known as direct write laser annealing (DWLA), and it makes it possible to heat areas of the sample that measure just 150 nm across.

In each heated area, thermal energy from the laser is deposited at the surface and partially absorbed by the film down to a depth of around 100 nm). The remainder dissipates through a silicon substrate coated in 300-nm-thick silicon oxide. However, the thermal conductivity of this substrate is low, which maximizes the temperature increase in the film for a given laser fluence. The researchers also sought to keep the temperature increase as uniform as possible by using thin-film heterostructures with a total thickness of less than 20 nm.

Crystallization and interdiffusion effects

Members of the PSI-ETH Zürich team applied this technique to several technologically important magnetic thin-film systems, including ferromagnetic CoFeB/MgO, ferrimagnetic CoGd and synthetic antiferromagnets composed of Co/Cr, Co/Ta or CoFeB/Pt/Ru. They found that DWLA induces both crystallization and interdiffusion effects in these materials. During crystallization, the orientation of the sample’s magnetic moments gradually changes, while interdiffusion alters the magnetic exchange coupling between the layers of the structures.

The researchers say that both phenomena could have interesting applications. The magnetized regions in the structures could be used in data storage, for example, with the direction of the magnetization (“up” or “down”) corresponding to the “1” or “0” of a bit of data. In conventional data-storage systems, these bits are switched with a magnetic field, but team member Jeffrey Brock explains that the new technique allows electric currents to be used instead. This is advantageous because electric currents are easier to produce than magnetic fields, while data storage devices switched with electricity are both faster and capable of packing more data into a given space.

Team member Lauren Riddiford says the new work builds on previous studies by members of the same group, which showed it was possible to make devices suitable for computer memory by locally patterning magnetic properties. “The trick we used here was to locally oxidize the topmost layer in a magnetic multilayer,” she explains. “However, we found that this works only in a few systems and only produces abrupt changes in the material properties. We were therefore brainstorming possible alternative methods to create gradual, smooth gradients in material properties, which would open possibilities to even more exciting applications and realized that we could perform local annealing with a laser originally made for patterning polymer resist layers for photolithography.”

Riddiford adds that the method proved so fast and simple to implement that the team’s main challenge was to investigate all the material changes it produced. Physical characterization methods for ultrathin films can be slow and difficult, she tells Physics World.

The researchers, who describe their technique in Nature Communications, now hope to use it to develop structures that are compatible with current chip-manufacturing technology. “Beyond magnetism, our approach can be used to locally modify the properties of any material that undergoes changes when heated, so we hope researchers using thin films for many different devices – electronic, superconducting, optical, microfluidic and so on – could use this technique to design desired functionalities,” Riddiford says. “We are looking forward to seeing where this method will be implemented next, whether in magnetic or non-magnetic materials, and what kind of applications it might bring.”

The post Shining laser light on a material produces subtle changes in its magnetic properties appeared first on Physics World.

Learn how heartworm disease became widespread in dogs, reflecting an evolutionary history that spans back to ancient times. 

Starfish Space has won a contract from the Space Development Agency to deorbit satellites in a missile-tracking and communications constellation, evidence that deorbiting services are moving into the mainstream.

The post Starfish Space wins SDA contract to deorbit satellites appeared first on SpaceNews.