New reports suggest that AMD's upcoming generation of graphics cards (likely named RDNA 5) will embrace the newer HDMI 2.2 standard. However, don't expect a full doubling of bandwidth right out of the gate. Reports indicate these next-gen GPUs will support HDMI 2.2 speeds of up to 80 Gbit/s, a significant bump from HDMI 2.1's 48 Gbit/s, but fall short of the standard's theoretical 96 Gbit/s maximum.

According to Kepler, the RDNA 5 (or UDNA) GPUs, internally codenamed GFX13, are specified to support two modes: 64 Gbit/s and 80 Gbit/s. This implies that the highest 96 Gbit/s mode, which would demand the new “Ultra96” HDMI cables, will not be supported, at least initially. It remains unclear whether this is a hardware limitation of the upcoming GPUs or if full 96 Gbit/s support could be enabled later (for example, through driver updates).

The leaker also noted that there is currently no information regarding DisplayPort 2.1b compatibility for the GFX13 architecture. On the other hand, Nvidia's RTX Pro Blackwell and GeForce RTX 50 series already support this standard, putting them ahead in that specific aspect.

Kepler's report doesn't distinguish between the Radeon RX (consumer) and Radeon Pro (professional) series of GPUs. The update refers broadly to the GFX13 display engine, and historically, AMD has sometimes differentiated display output capabilities between its consumer and professional lines. Whether this trend will continue with the GFX13 remains to be seen.

KitGuru says: Would you rather see AMD pushing the DisplayPort standard further on its upcoming GPUs instead of HDMI?

We take a look at Thermaltake’s full immersion cooling setup and several new cases that include the View 390 Air, TR200, TR300, and more

The Highlights

• Thermaltake’s full immersion cooling setup uses liquid and comically large hoses coupled with a massive radiator system
• Thermaltake’s upcoming View 390 Air case looks promising and offers a curved glass side panel
• The company’s TR200 and TR300 are budget friendly cases that include a TFT display panel on the front
• Thermaltake’s Mine Cube looks very reminiscent of another popular IP and offers a cooler block with 4 screens

Table of Contents

• AutoTOC

Intro

We visited Thermaltake’s booth at Computex 2025 and the company showed off its Immersion Cooling system, View 390 Air case, “Minecube” cooler, and TR200/TR300 cases.

Editor's note: This was originally published on May 20, 2025 as a video. This content has been adapted to written format for this article and is unchanged from the original publication.

Credits

Host

Steve Burke

Camera, Video Editing

Mike Gaglione
Vitalii Makhnovets

Writing, Web Editing

Jimmy Thang

Immersion Cooling

At the show floor, the company showed off a setup that offers 50 liters of “immersion cooling” within their new IX700 case. Immersion cooling means that the system is in liquid. The liquid is PA2, which is one of the more economical solutions, but is still expensive. Thermaltake tells us it's between $20 to $30 per liter.

The liquid is piped through 2 gigantic pipes, which Thermaltake tells us is rated for 20 bar. That’s insane. It then connects to a massive 4-radiator system. Overall, it’s a showcase for an enterprise solution, but it’s super cool. 

The PC had its CPU, an Intel Xeon w9-3495X, and GPU both at 100% load. CPU core temperature clocked in at about 60 degrees C and the GPU was about 64 degrees C. We estimate that the room the computer was in felt about 23 degrees C. 

The system is running 4 pumps and 4 radiators using a 4x420mm setup that are 64mm thick. Thermaltake is thinking that its immersion cooling setup will be a build-to-order enterprise solution. Taking a closer look at the radiators, they felt warm when we put our hands next to them.  

The system uses dielectric fluid, which means it’s non conductive. 

The hoses for the system seem overkill and we don’t know what industry they come from. 

View 390 Air

The View 390 Air is a $150 case. The company is thinking about including 2 fans for that price, but the company is still deciding between offering 2 fans in the front or in the back. In our opinion, Thermaltake should provide the 2x200mm fans in the front as users are less likely to already have those.   

The case’s glass side panel provides a solid wall all the way around the case. The glass measures 4-5mm thick, which is very large glass. Interestingly, closing off the top panel can work better for CPU thermals sometimes. The reason is that when you push air in, it’s not able to escape through the top.   

There is a screen that’s mounted above the motherboard, which is optional. If you don’t buy the screen version, there’s just a steel plate there instead. 

The case has spots for 3 sunken 120mm fans at the bottom and room for 3 fans on the side. We do like seeing the option for 2 fans in the back when there’s room for it, but it does make the case taller.   

TR100

The company showed off several different color SKUs of the TR100, which is a case that’s already out on the market. 

TR200 and TR300

Thermaltake also showed off its TR200 micro-ATX case. It’s supposed to be $80.

The TR300, meanwhile, is a $100 case. 

Neither case has a riser, which means the GPU is normally installed. Both cases use a newer TFT display panel on the front, which Thermaltake says offers better brightness and sharper resolution than their prior panels. 

The company also showed off a prototype wood front panel. 

Looking inside the TR300, we can see a lot of Yeston-inspired marketing material on the pump block. In addition, the case also has a closed-off side near its front that tries to obscure the power supply and its cables because the PSU is mounted to the front and is rotated on its side. Unfortunately, this design does limit options for intake fans in the front. The case relies on bottom intake fans and some on the side. Again, unfortunately, the bottom of the TR300 is not that elevated though the TR200 does have more room to breathe, which we liked seeing. 

Thermaltake is looking at a Q3 launch for both cases. 

Mine Cube

The font and aesthetics of the Mine Cube might look familiar, but is legally distinct... The Mine Cube is a cooler block with 4-sided screens, which includes the top and 3 sides. It sits on top of a VRM fan and RAM fan. 

One feedback we offered was that there was no vent on the north side to allow air to hit the VRM from this angle.

Internally, the block cover has some slats. The unit we saw only was able to get in air through one side, but we looked at a really early prototype. Users can orient the Mine Cube to whatever position they want. 

There’s a couple challenges for Thermaltake to overcome here. The first of which involves software, particularly if you want to try and link the screens in any way. The unit we saw at Computex had a character moving from one screen to the next. The other main challenge pertains to cost, especially as it comes to controlling the screens. To address this, Thermaltake has gone to a single IC to control all 4 screens. Regardless, the 360mm model, which is the only one we know of at the moment, still ends up around $350. When we asked them about the technological challenges of trying to drive 4 screens through a liquid cooler, the company said it was “not making it $600,” which is a totally valid answer. 

Thermaltake is targeting an August release for the Mine Cube. 

Project Edge

Thermaltake also showed off an early prototype of its Project Edge set of fans, which offers a series of progressing screens. The company thinks this is where the future of fans might be. To add some context here, Lian Li makes a bunch of money selling fans with LCDs on them. Now the direction might be LCDs on the side of fans.

During the VLSI Symposium in Japan, Intel shared some details on its new 18A process node, which is poised to enter full production in the latter half of 2025. This isn't merely an incremental step; Intel 18A represents a fundamental re-engineering of the silicon foundation, combining Gate-All-Around (GAA) transistors with their innovative PowerVia backside power delivery network, all wrapped within a completely revamped metal stack design.

The integration of PowerVia is a game-changer. By routing power through the back of the chip, Intel has managed to tighten the connection pitches on critical front-side layers, while simultaneously relaxing spacing on the very top layers. This strategic shift not only promises to enhance manufacturing yield but also significantly simplifies the fabrication process itself. As shown by HardwareLuxx, the numbers speak volumes: in standardised power, performance, and area (PPA) tests conducted on an Arm core sub-block, Intel 18A showcased approximately 15% better iso-power performance than Intel 3. Pushing the voltage to 1.1V, clock speeds can increase up to 25% without incurring additional energy expenditures. Even at a lower 0.75V, performance can improve by 18%, or power consumption can be slashed by nearly 40%.

Under the hood, this process node achieves substantial reductions in cell height. Performance-tuned cells now measure a compact 180 nanometres, while high-density designs shrink further to just 160 nm, both notably smaller than their predecessors. The structure of metal layers has also been refined, as the front-side layers have been reduced from a range of 12-19 on Intel 3 to 11-16 on Intel 18A. To facilitate PowerVia, three additional rear metal layers have been added. Moreover, the pitches on the lower metal layers (M1 through M10) have been dramatically tightened, going from as much as 60 nm down to 32 nm, before intentionally increasing again in the uppermost layers. Adding to the manufacturing efficiency, low-NA EUV exposure is employed on layers M0 through M4, which slashes the number of masks required by an impressive 44%, further simplifying the overall production flow.

Intel intends to debut its 18A technology in key upcoming products. This includes the low-power Panther Lake, aimed at mobile platforms, and the efficiency-core-only “Clearwater Forest” Xeon 7 series for server applications. Recognising the diverse needs of different markets, Intel will offer multiple variations of the 18A process, including a cost-optimised 17-layer variant, a balanced 21-layer option, and a performance-focused 22-layer arrangement, ensuring flexibility for a wide range of applications.

KitGuru says: Can Intel recover its footing in the foundry business with its new 18A process node?

It would appear that fans have turned on Monster Hunter Wilds. While the game launched to generally positive reviews earlier in the year, fans have grown frustrated with the gameplay changes made in the sequel, and now the game's Steam review score has dropped down to overwhelmingly negative. 

For Monster Hunter Wilds, Capcom looked to make the game more accessible to a broader audience. As a result, new mechanics were introduced, like auto-pathing to targets, the ability to sharpen weapons and heal while riding, and a ‘focus mode' in combat that makes it easier for players to target monster weak points. This is all very different to Monster Hunter World, where hunts often required more careful planning and multiple chase attempts before taking a beast down.

Now, fans have begun putting all of these complaints front and centre under the Monster Hunter Wilds Steam page. The game's overall review score has dropped to Overwhelmingly Negative on Steam, and as pointed out by Windows Central, players have been dropping Wilds in favour of going back to Monster Hunter World on PC.

Aside from complaints around the ‘streamlined' experience in Monster Hunter Wilds, many PC players are also frustrated by the game's performance. Wilds runs quite poorly on mid-range PCs and older generation hardware, even on modern high-end systems, it is recommended that Frame Generation is enabled to bring an artificial boost.

KitGuru Says: Capcom has not yet responded to the rise in player complaints. However, a showcase is happening soon, so we expect to see some Monster Hunter Wilds related announcements.

The Nintendo Switch 2 has been off to a hot start, becoming the fastest selling console to date thanks to strong launch weekend sales. The Switch 2 also launched with a pretty strong line-up of third-party games, but so far, publishers are being disappointed by the results.

While Nintendo has already sold millions of Switch 2 consoles, and has observed strong sales for its launch game, Mario Kart World, third-party publishers have not yet benefitted from the boom in Switch 2 console sales. According to TheGameBusiness, analysis shows that the majority of Switch 2 game sales in the UK and US so far have been for first-party titles like Mario Kart World.

One third-party publisher told the outlet that Switch 2 sales have so far been “below our lowest estimates”. However, there is good reason to think that this is a temporary problem and not a sign that third-party publishers will struggle to find success on Nintendo's latest console.

So far, the majority of third-party Switch 2 games are ports of previously released games, and some of them were even available on the Switch 1. As the Switch 2 features backwards compatibility, many early adopters of the Switch 2 may be playing older Switch 1 games in their catalogue. As more brand-new titles land on the Switch 2, we would expect to see third-party performance lift up overall.

KitGuru Says: The line-up of brand-new games for the Switch 2 launch was underwhelming, but there are more games releasing every month.

NetEase has primarily focused its game development and publishing efforts on games with broad multiplayer appeal. However, for the first time, NetEase is now working on its first single-player game, and it is coming from the studio behind Naraka: Bladepoint.

Blood Message is a new game coming from NetEase and 24 Entertainment. The game's reveal today comes paired with a trailer, promising a cinematic story-driven action-adventure for both PC and consoles. Like most major AAA projects this generation, Blood Message is being developed using Unreal Engine 5.

Blood Message is set during the final years of the Tang dynasty. Players will go on a 1000-mile journey to Chang'an the centre of the Tang Empire. This lengthy journey will take players across the vast wilderness of East and Central Asia, all the while surviving brutal sieges.

The game promises a blend of stealth combat and survival mechanics, expansive landscapes, cinematic storytelling and a “deeply emotional journey exploring themes of family, honor, sacrifice and cultural identity”.

Blood Message does not yet have a release date.

KitGuru Says: What did you think of the announcement trailer? 

This week has been a bit of a wild one in rumour land. A previously reliable source made the bombshell claim that Microsoft had hired the developers behind the Xenia emulator to work on an official Xbox and Xbox 360 emulation tool for PCs and new devices like the Xbox Ally. Unfortunately, it turns out that this rumour may have been all smoke with no fire. 

Extas1s made a name for themselves online in recent years following a string of accurate leaks. However, this particular leak may be more fiction than fact. After claiming that Microsoft had hired developers behind Xbox 360 emulator, Xenia, for a push to bring the ‘Xbox Classics' library to more devices, one of the Xenia team members spoke out. According to Xenia developer ZoloKluk, Microsoft has not hired them and added that “Microsoft has their own Xbox 360 emulator” and would have no need to consult Xenia developers.

Another well known Xbox reporter, Windows Central's Jez Corden, also stated that while Microsoft is known to be looking at ways to bring more Xbox games to more devices, this emulation scenario “isn't a thing at the moment”.

As spotted by Insider Gaming, Extas1s did double down on his original report, claiming that Xenia project contributors were hired by Microsoft through an internal initiative that brings GitHub contributors into Microsoft for various projects. However, Microsoft just announced plans to let go of thousands of employees and has been actively shedding workers for the past 18 months, so it is unclear how reliable this claim really is.

KitGuru Says: At this point, I'd be putting my money against the idea that Microsoft is working on a new emulator destined for Windows. However, if Microsoft really does switch to a ‘gaming' version of Windows for the next Xbox, then I wouldn't rule it out in a few years' time. 

Asus has just revealed the Pro WS Platinum power supply line, which was announced at Computex 2025. Available in whopping 3000-watt, 2200-watt, and 1600-watt variants, these heavy-duty PSUs are engineered to drive multiple high-end graphics cards.

The PSUs incorporate PCIe connectors with gold-plated copper pins. This design choice promises to reduce connector temperatures by up to 10°C compared to standard 12V-2×6 connectors and improve power delivery efficiency by increasing contact between internal socket pins.

For thermal management and durability, the units use dual-ball fan bearings, which are designed for longer lifespans than sleeve-bearing alternatives. Extruded aluminium heatsinks are also integrated to dissipate heat from internal components. The PSUs are housed in a 175 mm-long chassis, shorter than some other 1600W units available.

These power supplies are compliant with ATX 3.1 and PCIe 5.1 standards. The cables are flexible and etched, with distinct colours for CPU and PCIe power connectors to aid installation and cable routing. Moreover, the Pro WS Platinum series carries an 80 Plus Platinum certification, indicating high power efficiency. This efficiency is partly attributed to the use of Japanese server-grade capacitors. A protective coating on the PCB is present to guard against moisture, dust, and debris. The power supplies come with a 10-year warranty.

The 3000W model is rated to support up to four GeForce RTX 5090 graphics cards, the 2200W model can power up to four GeForce RTX 5080 cards, and the 1600W variant can run two GeForce RTX 5090 graphics cards.

KitGuru says: Regardless of your choice, a Pro WS Platinum PSU will provide plenty of power to feed your components.

For the past six months, EA has been loudly playtesting Battlefield 6 with large pre-alpha gameplay sessions leading to numerous gameplay leaks. Now, Battlefield 6 has reportedly hit a new development milestone, and more content is hitting the Battlefield Labs testing platform. 

According to Battlefield Labs playtesters speaking with Insider Gaming, Battlefield 6 recently changed from pre-alpha to alpha, marking a major development milestone. Battlefield 6 does not yet have a release date, but we expect to see more playtests in the coming months, and EA has confirmed that the game will launch in the current fiscal year, ending in March 2026.

Leaks through Battlefield Labs have also revealed new assets for the game's single-player campaign, and assets for a Battle Royale mode. DICE did previously attempt to bring Battle Royale to Battlefield with the Firestorm mode in Battlefield V, but it did not achieve broad popularity. The Battle Royale idea has been put on ice in subsequent games but appears set for a return in Battlefield 6.

Apparently we'll be getting the first official Battlefield 6 trailer before the end of the Summer, which puts Gamescom as a likely reveal event.

KitGuru Says: If DICE could just get a launch right, we'd be having much more positive conversations around the Battlefield franchise right now. Hopefully these extra months of playtesting will pay off when Battlefield 6 hits the market. 

Back in March, the team at FuturLab officially announced that a sequel to the much-loved PowerWash Simulator would be arriving at some point this year. Though a release date has yet to be shared, a new trailer has dropped for the sequel – detailing many of its new gameplay additions and improvements.

Releasing a new Gameplay trailer alongside a blog post, the team at FuturLab officially detailed some of the many changes and enhancements coming with PowerWash Simulator 2. Alongside previously-confirmed details (such as 4-player co-op with shared progression; a new home base; customisation and more), PowerWash Simulator is said to include:

• Multistage levels which unveil more to clean once you’ve completed the first stage
• ProRise AE-300 abseil rope for greater verticality
• ProRise SCF-5X scissor lift
• Customisable home base decor
• New ‘SwirlForce Surf Ace’ floor cleaning tool
• The ability to pet cats

FuturLab promises to be “taking a deeper dive into some of these in the coming weeks”. PowerWash Simulator was a huge hit which managed to take the ‘simulator’ genre of games in new directions when it launched back in 2022. Hopefully PowerWash Simulator 2 is even more satisfying and zen than the first.

KitGuru says: What do you think of all the new features so far? Do you like the idea of the sequel expanding its scope? What was your favourite tool in the first game? Let us know down below.

A couple days ago it was officially announced that Crash Team Racing: Nitro-Fueled – the remake of Naughty Dogs classic PSOne kart racer – had sold over 10 million copies. This is despite the fact that the game was released exclusively for the PS4, Xbox One and Nintendo Switch. Though it should be taken with a pinch of salt, a new ‘leaker’ has claimed that an enhanced port called the ‘Grand Prix Edition’ is set to come to current-gen consoles, and for the first time, PC.

Taking to the Crash Team Racing subreddit, a new user who claims to ”work for a small studio under Activision and Microsoft” has shared a ton of details for what is listed as ‘Crash Team Racing: Nitro-Fueled – Grand Prix Edition’ alongside some blurry screenshots.

According to the leak, this enhanced version of the game is planned to come to PC platforms in 2026 (though they could not confirm whether Steam would be included) alongside the PS5, Xbox Series X|S and Switch 2 for $40.

Beyond this, the game is said to include “A few new characters,” a new track and the titular Grand Prix. Last but not least, the title will reportedly feature cross-play support for all current-gen platforms.

It is also worth noting that the leaker claims that Nitro-Fueled’s original developers Beenox had “absolutely no hands on what we did with this re-release” though gameplay remains entirely intact – “other than adding a reserve meter.”

Given the odd release of Crash Team Racing: Nitro-Fueled in the first place, it would be highly appreciated if the game were to find its way onto current-gen systems – and more importantly PC. We will have to wait and see whether anything comes of this ‘leak.’

KitGuru says: What do you think of the leak? Do you believe it? Why do you think a PC version was never made in the first place? Let us know down below.

Over the past half a decade or so, we have seen an influx in adaptations of various video game IPs. One of the more obscure announcements was for a live-action Netflix film based on the classic Dragon’s Lair arcade game. Announced all the way back in 2020, the Ryan Reynolds-led project has finally found its director.

As revealed by TheHollywoodReporter, James Bobin is confirmed to be helming directorial duties for the Netflix distributed Dragon’s Lair. As mentioned, Ryan Reynolds is also attached to the project, said to be starring in the film while also serving as producer.

Announced back in 2020, Netflix offered few details at the time, aside from the fact that the plot will revolve around Ryan Reynolds starring as “noble Knight Dirk the Daring, on his quest to rescue Princess Daphne from the titular dragon.”

For the uninitiated, James Bobin is a rather interesting choice for director, having been a major part of the classic 2000s British comedy ‘Da Ali G Show’ while also co-creating the Australian comedy ‘Flight of the Conchords’. Beyond this, Bobin also directed 2011’s The Muppets film as well as 2014’s Muppets Most Wanted.

Given the fact that the film was announced half a decade ago, it is surprising to see the project is still alive and finally finding its footing.

KitGuru says: What do you think of this latest update? Do you have any hopes for the Dragon’s Lair film? What’s your favourite project from Bobin? Let us know down below.

Following a year of PlayStation 5 exclusivity, Stellar Blade (from studio SHIFTUP) launched on PC last week to huge numbers – selling over 1 million copies almost immediately and breaking records for Sony on Steam. It therefore comes as little surprise that according to new reports, a Switch 2 version of Stellar Blade appears to be on its way.

As reported by the Korean site PlayForum, Stellar Blade studio SHIFTUP are said to be prepping for a Switch 2 version of the PS5/PC title, writing (as translated from Korean):

“ShiftUp has recently secured an official developer kit for Switch 2 and has begun initial work”. According to the report, this upcoming release is said to be “closely linked to ShiftUp's IP expansion strategy.”

Though far from proof of its existence, in celebration of the game selling 3 million copies, Stellar Blade studio SHIFTUP did gift all of its employees with Switch 2s – which does tie in nicely to this rumour.

Of course, as with all rumours, this should be taken with a pinch of salt. That said, with Stellar Blade no longer tied down to the PS5, and the PC version officially out of the way, it makes sense for the team to move on to another platform.

KitGuru says: Did you pick up Stellar Blade on Steam? How do you think the Switch 2 would handle the game? What do you think the team is working on next? Let us know down below.

The specs of the ASRock Taichi TC-1300T ATX 3.1 PSU are attractive, two native 12V 2×6 connections with integrated temperature sensors that can handle 600 watts each, a 135mm fan, 80 PLUS…

There was yet another issue with patch Tuesday, one which didn't make itself obvious until the IP leases on clients started to expire and were sometimes unable to renew their IP or…

AMD's Radeon RX 9000 series launched with the FidelityFX Super Resolution 4, AMD's upscaling method that leverages an AI-powered algorithm to boost image quality. Before the RDNA 4 architecture made its official debut, early tests hinted at significant visual improvements on the new GPUs. Officially, FSR 4 only works with the Radeon RX 9000 series, but theoretically, the Radeon RX 7000 series can also use it.

Sick of waiting for an official announcement from AMD, some users have been trying to mod FSR 4 (with success) using Optiscaler. One such user was Virtual-Cobbler-9930 (via Wccftech), who shared some performance and image quality results.

Image credit: Reddit (Virtual-Cobbler-9930)

To get FSR 4 working on RDNA 3 graphics, you need to activate it with the command: WMMA_RDNA3_WORKAROUND. While RDNA 3 GPUs support WMMA (Wave Matrix Multiply Accumulate) for FP16 data, RDNA 4 further enhanced these instructions to natively accommodate formats like FP16, BF16, and INT8, which are crucial for the AI-powered upscaling. It appears someone has found a way to emulate these functionalities on RDNA 3.

The results from Cyberpunk 2077 indicate a clear improvement in graphic quality, with less smearing on elements like grass and bushes. However, this visual fidelity comes with a performance cost. Running the game's built-in benchmark with FSR Quality settings saw frame rates drop from 85.06 FPS to 56.28 FPS. Similar findings were observed in titles like Oblivion Remastered, where the visual artifacts were reduced. The performance hit ranged from 20% to 30%. The visual improvements in games like Oblivion and Marvel Rivals were also noticeable, but in Cyberpunk 2077, both cases had a performance hit compared to FSR 3.1.

This FSR 4 workaround offers a glimpse into enhanced visuals for RDNA 3 owners, showing that it could be worth considering for games beyond the most demanding AAA titles. However, one must be aware of the significant performance impact that it brings. On the other hand, this unofficial implementation sheds some light on why AMD opted not to offer the capability to older GPU series. Even with workarounds, the raw processing power needed for the AI upscaling appears to heavily tax the older hardware, consuming resources that would otherwise be dedicated to rendering the scene. Whether AMD will eventually find a more optimised official path remains to be seen.

Discuss on our Facebook page, HERE.

KitGuru says: Do you have a Radeon RX 7000 series GPU? Will you be trying Optiscaler to enable FSR 4?

Gamers who prefer to avoid graphics software from AMD or Nvidia and its overlays might be using Steam's Performance Monitor, assuming they're playing games on the platform. Valve has just introduced an update, adding new metrics and frame generation detection.

As first noted by SteamDB, the new Performance Monitor expands its capabilities dramatically, offering a wealth of real-time metrics. Players will be able to track crucial data points, including FPS, upscaled FPS, a live FPS graph, CPU clocks and utilisation, GPU usage, temperatures, and both memory consumption and utilisation. The overlay will also indicate whether frame generation is active with two FPS counters: rendered and frame generation frames.

This suite of information gives gamers deeper insights into their system's performance without leaving their game. Players can customise the display, from showing all available metrics to something simpler, like the FPS and its graph only.

Currently, this functionality is only accessible within the Steam Beta client. Those eager to try it out must opt into Steam's beta version. Valve has indicated that some metrics may not be available on all platforms initially, but broader support will be rolled out in future updates.

Discuss on our Facebook page, HERE.

KitGuru says: Do you use Steam's Performance Monitor? Will you start using it more with this update?

AOC is launching three compelling new QHD displays, each delivering esports-level refresh rates without demanding a premium price tag. Leading this charge is the AOC GAMING Q25G4SR, a compact powerhouse that achieves an astonishing 300Hz refresh rate within a 24.5-inch form factor. It's joined by two 27-inch models, the Q27G4ZR and the value-focused Q27G42ZE, both offering a 240Hz refresh rate with additional overclocking headroom up to 260Hz. 

The Q25G4SR stands out in the crowded gaming monitor landscape, combining a QHD (2560×1440) resolution with its compact 24.5-inch screen size. This results in an impressive pixel density, delivering that blend of high resolution and smaller footprint many enthusiasts have been clamoring for. Its Fast IPS panel offers a 300Hz refresh rate, translating into smooth gameplay with rapid response times as low as 1ms GtG and 0.3ms MPRT when Motion Blur Reduction (MBR) is enabled. The monitor is also VESA DisplayHDR 400-certified and comes with a fully adjustable stand, offering 130mm of height adjustment alongside tilt, swivel, and pivot flexibility to adapt to any gaming setup. Connectivity options include 2x HDMI 2.1 connectors and a DisplayPort 1.4, ensuring compatibility with the latest graphics cards and next-generation consoles without bandwidth compromises.

Stepping into the 27-inch category, the Q27G4ZR offers a 240Hz refresh rate, with the flexibility to overclock to 260Hz. This model also provides comprehensive connectivity options with two HDMI 2.0 connectors and a DisplayPort 1.4, alongside integrated 2W stereo speakers. Its fully ergonomic stand mirrors the functionality of its 24.5-inch counterpart, providing ample adjustment. DisplayHDR 400 certification ensures bright imagery for all game content and comfortable viewing even in brighter environments. The Q27G4ZR maintains the same rapid response speeds of up to 1ms GtG and 0.3ms MPRT with MBR.

For gamers focused on value, the Q27G42ZE presents a highly attractive option. It delivers the same core performance as the Q27G4ZR, including a 240Hz refresh rate (overclockable to 260Hz) and nearly identical Fast IPS panel specifications. However, it streamlines certain features, such as a tilt-only stand, a single HDMI 2.0 port alongside its DisplayPort 1.4, and a 300 cd/m² brightness.

Each monitor is equipped with AOC's extensive gaming toolkit. Features like Shadow Control, Game Colour, Dial Point crosshair, and a Low Input Lag mode are available on all models. All three Fast IPS panels promise consistent performance across wide viewing angles with impressive colour accuracy. The Q25G4SR and Q27G4ZR cover over 114% of the sRGB area, while the Q27G42ZE goes even further, covering 123.6% of the sRGB colour gamut. Critically, all three monitors are designed to support current-generation gaming at QHD resolution, making them versatile for PC and console gamers.

The AOC Gaming Q25G4SR will retail for £239.00, the Q27G4ZR for £209.00, and the Q27G42ZE for a budget-friendly £199.00. These monitors are expected to be available in mid-June 2025.

Discuss on our Facebook page, HERE.

KitGuru says: Which of the three new AOC monitors best fits your needs?

In a major update this week, id Software added Path Tracing technology to DOOM: The Dark Ages. This enhanced form of ray tracing allows for higher fidelity and more ray bounces. The update has also quietly added an array of new in-game benchmarks to the game for those looking to quickly put their rig to the test.

Our GPU reviewer, Dom, has been putting the new in-game benchmarks to the test this afternoon. Here are the results for the Hebeth, Abyssal Forest and Reckoning benchmarks on an RTX 5070 Ti with DLSS and Multi-Frame Gen enabled:

There are seven in-game benchmark scenes in total, Hebeth, Siege, Abyssal Forest, Sentinel Command Station, Spire of Nerathul, City of Ry'uul and Reckoning. Benchmark mode creates a consistent, nearly deterministic path through a section of select DOOM: The Dark Ages levels to that players can see how their systems perform under a variety of video settings. Using this mode players can see how far they can push their system performance.

While running one of the benchmarks, you can display or hide graphs displaying frame rates, frame times for CPU and GPU, and total resource usage.

DOOM: The Dark Ages is available now on PC via Steam and the Xbox app. It is also available to play via Game Pass on both PC and console.

Discuss on our Facebook page, HERE.

KitGuru Says: Have you played DOOM: The Dark Ages yet? Have you tried out the new Path Tracing graphics options?