ID-Cooling A720 AD & TD, A410 TD, Cheap AIOs, & Scented Paste | Everyone is Targeting Thermalright
jimmy_thang
June 23, 2025
We take a look at ID-Cooling’s new air and liquid coolers, which aim to balance quality and value with their designs
The Highlights
- ID-Cooling’s A720 AD and A720 TD represent the company’s attempt to fix its acoustic problems while being affordable
- ID Cooling has a range of liquid coolers from low-end to high-end starting around $80 to $100 for 360mm coolers
- The company’s SL360 V2 Plus cooler interestingly uses a larger radiator than it does fans
Table of Contents
Grab a
GN15 Large Anti-Static Modmat to celebrate our 15th Anniversary and for a high-quality PC building work surface. The Modmat features useful PC building diagrams and is anti-static conductive. Purchases directly fund our work! (or consider a
direct donation or a
Patreon contribution!)
Intro
We visited ID-Cooling’s booth at Computex 2025 and the company showed off scented paste…and a bunch of coolers.
Looking at the company’s product at the trade show, we found ID-Cooling’s products to be more expensive than Thermalright's, but they’re cheaper than others in the market. This places them somewhere in the middle but the company is trying to keep quality levels in focus for some of their designs.
Editor's note: This was originally published on May 24, 2025 as a video. This content has been adapted to written format for this article and is unchanged from the original publication.
Credits
Host
Steve Burke
Camera, Video Editing
Mike Gaglione
Vitalii Makhnovets
Writing, Web Editing
Jimmy Thang
A720 AD
ID-Cooling has updated its A720. It’s calling it the A720 AD and it’s targeting the higher-end market but still trying to be affordable at around $70. It represents a serious overhaul from the A720 that we’ve tested before, which was one of the top performers for its price. It was competitive with Noctua and was cheaper. The updated A720 now has pogo pins to deliver power to the fan. This means the fan doesn’t have a cable.
ID-Cooling has also soldered the finstack to the heatpipes. This is something a couple companies are doing now. Some of them claim that this offers no performance improvement whereas others do claim a performance uplift. ID-Cooling says that, in a like-for-like scenario comparing the old A720 with the new one, the company is seeing about a 2 degree improvement at 280 watts.
The A720 AD uses PBT fans. The most expensive fans typically use LCP, which uses a liquid crystal material in the middle for the blades. Sometimes they’ll do LCP for the inner and the outer part of the fan. This is what Noctua has done for its super expensive fans where the company is trying to get the tip-to-frame clearance as small as possible, hitting clearance numbers like .6mm or .8mm. This low of a clearance requires LCP or metal. ID-Cooling is using PBT, which helps with the price. The company tells us it’s supposed to be 30% fiberglass reinforced, which helps maintain the rigidity as the fan blades stretch towards the inner walls of the frame over time.
620 AD
We tested ID-Cooling’s 620 in the past as well. It competed pretty closely with ID-Cooling’s older AK620, but the company showed off its new 620 AD. Like the A720 AD, the company is soldering the fin stack to the heatpipes so there’s some improvement from that and it also moves to a newer fan design.
Visit our
Patreon page to contribute a few dollars toward this website's operation (or consider a
direct donation or buying something from our
GN Store!) Additionally, when you purchase through links to retailers on our site, we may earn a small affiliate commission.
We asked ID-Cooling what is the biggest thing it’s trying to change with its revised coolers, and the company told us acoustics is the number 1 complaint it got. So the company has reshaped its blades to feature a more gradual curve to mitigate this issue. ID-Cooling has also changed the blade angle at the hub. We aim to test all of this as soon as it becomes available. It will be $55 and the company hasn’t announced a release date yet. We imagine it might come out around Q4.
The 620AD offers 3 different levels for the RAM clearance on the front, which can be adjusted and clipped in.
The outside fan is 28mm and the inside fan is 30mm. This allows the cooler to maintain a higher static pressure through the fin stack, especially with the dual-tower fin stacks.
410 TD
ID-Cooling already has its 410 series of coolers, but the company showed off its 410 TD at Computex. The TD stands for temperature display. This does increase the price a little and will supposedly make the 410 TD a $35 cooler. It has a temperature digital display that shows the CPU temp. The finstack thickness has also changed with the TD model moving to 50mm. The heatpipes are all using a composite powder and groove style.
It’s also made changes to the cold plate where ID-Cooling is trying to push the 4 heatpipes as close together as possible. It’s not as impressive as we saw at Scythe’s Computex booth, where Scythe basically conjoined them all into one direct touch pad, but they’re getting closer.
ID-Cooling Liquid Coolers
ID-Cooling showed off a bunch of liquid coolers at Computex 2025, though not as much as at Thermalright’s booth.
SL 360 V2+
One of the liquid coolers, the SL 360 V2+, immediately jumped out at us because its fans are a different width than the radiator. That’s abnormal. The fans are 120mm but the radiator measures 140mm wide and it was done to incorporate LED lights on the sides of the fans.
To compensate for the smaller fans, ID-Cooling has added 2 water channels. ID-Cooling also added more liquid. Between the tank and the extra channels, it ends up with 36g more liquid. The propylene glycol percentage is around 15%. The reason that’s important is that the more distilled water there is in the loops, the better the cooling performance is. Propylene glycol helps with things like cold storage, transit, freight, and cold temperatures, but going too high with that compromises performance. 15% is a little on the lower end, which is a good thing for performance. The fans are AP120s and are 28mm thick. ID-Cooling tells us the cooler will have a 6-year warranty and that the surface area has been increased by about 15% compared to traditional 360 setups due to the size change. The cooler is supposed to be $190 when it comes out.
Unfortunately, the cooler doesn’t come with an offset bracket, and we’ve requested that ID-Cooling include one.
ID-Cooling informed us that there’s a .5mm gap between the bottom of the microfins and the bottom of the cold plate. Lian Li is experimenting with .3. The downside to that, or something smaller, is there could be more flex/more weakness. The upside is the performance will be better because you’re getting the liquid and the microfins closer to the heat source, which is the CPU IHS.
FX 360 TD Black
At $80, the FX 360 TD Black is the cheapest liquid cooler ID-Cooling showed off. It offers a 360mm cooling setup that’s 27mm thick, which is standard.
With an LCD screen, it’s $90. And it’s a 240x240 screen.
DX 360
The company’s DX 360 liquid cooler offers a thicker 38mm radiator. It’s supposed to be $120 with its 2.8-inch LCD screen. Launch is TBD.
DX 360 GDL
Our
fully custom 3D Emblem Glasses celebrate our 15th Anniversary! We hand-assemble these on the East Coast in the US with a metal badge, strong adhesive, and high-quality pint glass. They pair excellently with our
3D 'Debug' Drink Coasters. Purchases keep us
ad-free and directly support our consumer-focused reviews!
We saw a prototype of the DX 360 GDL at the show. The key thing about this liquid cooler is that it has very short 100mm-length tubes. They go out from the block and go right into the radiator. The downside to this design is that it forces you to put your radiator at the top, which can be problematic in a super-tall case. The benefit to this design is that it looks clean.
ID-Cooling has also added 82 grams of additional liquid by changing the radiator size, which is 130mm wide and has 120mm fans that are 27mm thick.
Its cap is also magnetic and pulls right off, which exposes the top of the tubes and the rest of the cooler’s block.